Airaya

Phone 888-245-8363 for access to our reseller's section, product data sheets and pricing.

08/27/2010

WirelessGRID™ Fixed Wireless Bridge
Outdoor Radio Kits, up to 108 Mbps
• 5.3-5.8 GHz License Free •
• 4.94-4.99 GHz Public Safety •

Product Highlights:
The Outdoor WirelessGRID series of bridges deliver a comprehensive range of product features, ensuring fast, secure and reliable networking services, including:

•    Range up to 7.5 miles (12 km) with built-in 23 dBi panel antenna.
•    Secure RF™ architecture - Multilayer link authentication and AES/WEP data
     encryption for secure point-to-point, point-to-multipoint, and repeater communication.
•    Data rate of 108 to 6 Mbps using AIRAYA’s adaptive intelligence (AI) engine and
     proprietary bridging protocol.
•    Real-time antenna alignment tool, which simplifies antenna alignment,
     optimizes link quality, and maximizes system throughput.
•    Real-time monitoring of WirelessGRID displays signal strength,
     connected stations, bridge stats, data rate, and channels.
•    Remote power for installing WirelessGRID bridges up to 300 feet away from your switch/router using power over Ethernet.
•    Compatibility with all standard 100Mbps Ethernet switches and routers, 802.1q, 802.1p, VPN, and VoIP.
•    Integrated architecture for ease of installation, configuration, and management.
•    LED diagnostics for indoor-to-outdoor unit connectivity and power monitoring.

Integrated Architecture
The indoor-outdoor architecture of the AI108-4958-O provides maximum range and capacity, delivering outstanding performance
in a fully integrated design. Utilizing OFDM technology in the 5GHz (4.940-5.850 GHz) frequency range, WirelessGRID bridges
operate at a range of up to 30 miles and at speeds up to 108 Mbps.

Optimized Performance
Ideally suited for bandwidth-hungry applications that require fast, affordable, reliable, and secure building-to-building connectivity,
the fully-integrated outdoor series of WirelessGRID bridges provides optimal delivery of IP voice, data, and video services.

Advanced Security and Configuration Flexibility
WirelessGRID security is provided with multi-layer MAC address link authentication and AES/WEP data encryption options,
ensuring the prevention of hacking, data theft and unauthorized intrusions.

Point-to-Point Bridge Kits with Integrated Antenna and Cable Two Bridge units, power supplies, and CAT 5e cables (length as indicated in description)
82-6806 (AI108-4958-0-050)	5GHz Point-to-Point Bridge Kits with Integrated Antennas - 50 ft. cables
82-6806-L	Includes installed PoE lightning suppression
82-6808 (AI108-4958-0-150)	5GHz Point-to-Point Bridge Kits with Integrated Antennas - 150 ft. cables
82-6808-L	Includes installed PoE lightning suppression
82-6809 (AI108-4958-0-300)	5GHz Point-to-Point Bridge Kits with Integrated Antennas - 300 ft. cables
82-6809-L	Includes installed PoE lightning suppression
82-6814 (AI108-4958-ON-150)	5GHz Point-to Point Bridge Kits with N-Type connectors • Requires Antennas
82-6814-L	Includes installed PoE lightning suppression
82-6869 (AI108-4958-ON-300)	5GHz Point-to Point Bridge Kits with N-Type connectors • Requires Antennas,
82-6865-L	Includes installed PoE lightning suppression
82-7905 (AI108-4958-0-050-PS)	4.9GHz Point-to-Point Bridge Kits with Integrated Antennas - 50 ft. cables
82-7905-L	Includes installed PoE lightning suppression
82-7906 (AI108-4958-0-150-PS)	4.9GHz Point-to-Point Bridge Kits with Integrated Antennas - 150 ft. cables
82-7906-L	Includes installed PoE lightning suppression
82-7907 (AI108-4958-0-150-PS)	4.9GHz Point-to-Point Bridge Kits with Integrated Antennas - 300 ft. cables
82-7907-L	Includes installed PoE lightning suppression
82-7908 (AI108-4958-ON-150-PS)	4.9GHz Point-to Point Bridge Kits with N-Type connectors • Requires Antennas
82-7908-L	Includes installed PoE lightning suppression
82-6787	Additional PoE Lightning suppressor 82-6787 is recommended for building side of 150 foot unit

WirelessGRID™ Fixed Wireless Bridge
Indoor Radio Kits
(4.940-5.850 GHz, Up to 108 Mbps)

AI108-4958 Kit

WirelessGRID AI108-4958 kit:
The complete AI108-4958-KIT is designed for use anywhere that fast and affordable wireless bridging between 2 sites is required. Utilizing 802.11a hardware technology and proprietary bridging software, the AI108-4958 provides up to 35 Mbps of actual throughput for multipoint and building-to-building communication utilizing 4.94-4.99, 5.25-5.35, 5.47-5.72, and 5.725-5.85 GHz.

Upgrade from 802.11B bridge links and increase your capacity by 5x. You gain the capacity you need and can still use your 802.11B bridge as a backup link, because the AI108 (4.94-4.99, 5.25-5.35, 5.47-5.72, 5.725-5.85 GHz) and 802.11B (2.4-2.4835 GHz) bridges do not interfere with each other.

Product Highlights:
The Indoor WirelessGRID Fixed Wireless Bridge delivers a comprehensive range of product features,
ensuring fast, secure and reliable networking services, including:
•    LED diagnostics for unit connectivity and power monitoring.
•    Data rate of 108 to 6 Mbps using AIRAYA’s adaptive intelligence (AI) engine and proprietary bridging protocol.
•    Range up to 30 miles (50 km) with external antenna options and radio output power settings (local regulations apply).
•    Compatibility with all standard 100Mbps Ethernet switches and routers, 802.1q, 802.1p, VPN, and VoIP.
•    Real-time antenna alignment tool, which simplifies antenna alignment, optimizes link quality,
      and maximizes system throughput.
•    Secure RF™ architecture - Multilayer link authentication and AES data encryption for secure point-to-point communication.

Cost-effective Architecture
The indoor version of the AIRAYA WirelessGRID fixed wireless bridge, coupled with an RF cable and outdoor antenna kit, provides maximum range and capacity, delivering outstanding performance in a simple, cost-effective design. Utilizing OFDM technology in the 5GHz (4.940-5.850 GHz) frequency range, Wireless GRID bridges operate at a range of up to 30 miles and at speeds up to 108 Mbps.

Optimized Performance
Ideally suited for bandwidth-hungry applications that require fast, affordable and reliable building-to-building connectivity,
WirelessGRID bridges provides optimal delivery of IP voice, data, and video services.

Design Simplicity
The design of the indoor WirelessGRID bridge provides many of the same features as our WirelessGRID outdoor wireless
bridge family, enabling seamless integration into existing Ethernet networks, while simplifying installation, diagnostics, and
management, at a reduced cost.

Advanced Security
Radio link security is provided with multi-layer MAC address link authentication, AES data encryption, and radius authentication, ensuring the prevention of hacking, data theft and unauthorized intrusions.

Typical Applications
Connecting two or more Ethernet networks together Providing high-capacity wireless ISP backhaul Backup of primary
inter-building network connections Temporary network connections T1, E1 and 802.11B bridge upgrades.

The AI108-4958-Kit includes:

2 Units AI108-4958-N indoor bridge (w/N-type female connectors)
2 Units 25 ft. LMR-400 RF cable (w/N-type male connectors)
2 Units AI108-2-23 outdoor antenna (23 dBi panel antenna w/N-type female connectors and mounting brackets)

Features include:

Simple to use web configuration and management utility
Distance tested: Over 5 miles under FCC/IC regulatory rules. (To 30 miles where local regulations allow)
Antenna Alignment: Real-time RSSi (Signal to Noise) Signal Monitor for Antenna Alignment and Link Quality
Real-time statistics: Monitor Bridge Status, Data Rate, Packet Error Rate (PER), RSSi (stats and graphing), and more...
SecureRF Security : Proprietary WirelessGRID Protocol, WirelessGRID bridge authentication. AES data encryption
Channel Size: 40, 20, 10, 5 MHz wide
Non-overlapping 4.94-4.99 GHz Channels: (Part 70 Public Safety) 4 x 20 MHz, 2 x 40 MHz, 4 x 10 MHz, 8 x 5 MHz
Non-overlapping 5.25-5.35 GHz Channels: (FCC, IC, Mexico, Poland) 19 x 5 MHz, 9 x 10 MHz, 4 x 20 MHz, 2 x 40 MHz
Non-overlapping 5.47-5.72 GHz Channels: (ETSI, FCC, ITU) with TPC and DFS. 44 x 5 MHz, 22 x 10 MHz, 11 x 20 MHz, 5 x 40 MHz
Non-overlapping 5.725-5.850 GHz Channels: (UNII/ISM Bands-ETSI, FCC, MII, RA, Mexico) 5 x 20 MHz, 2 x 40 MHz
Modes: 108, 96, 72, 54, 48, 36, 24, 18, 12, 9, 6 Mbps or Auto
Radio Transmit Output Power: 0 and 21 dBm. Supports Transmit Power Control and Dynamic Frequency Selection where required
Receive Sensitivity: between -73 to -91 dBm depending on mode of operation
Modulation: 64QAM, 16QAM, QPSK, and BPSK modulation
VPN Support : for Ethernet tagged frames (802.1q, 802.1p, and VPN)
AC Power Supply (100-120 AC, 50-60Hz input. 5 Volt, 2 Amp output, Bridge Connector: 2.1mm Coax - Center pin positive. 220v option available
LED diagnostics: For power, network link/activity, radio link/activity monitoring

The Indoor WirelessGRID Fixed Wireless Bridge delivers a comprehensive range of product features, ensuring fast, secure and reliable networking services, including:
   •   LED diagnostics for unit connectivity and power monitoring.
   •   Data rate of 108 to 6 Mbps using AIRAYA’s adaptive intelligence (AI) engine and proprietary bridging protocol.
   •   Range up to 30 miles (50 km) with external antenna options and radio output power settings (local regulations apply).
   •   Compatibility with all standard 100Mbps Ethernet switches and routers, 802.1q, 802.1p, VPN, and VoIP.
   •   Real-time antenna alignment tool, which simplifies antenna alignment, optimizes link quality,
         and maximizes system throughput.
   •   Secure RF™ architecture - Multilayer link authentication and AES data encryption for secure point-to-point communication

Key Specs: AI108-4958-kit
Distance tested to 5 miles. To 30 miles internationally. 108 to 1 Mbps Data Rates Support for 40, 20, 10, and 5 MHz wide channels Frequency Range Support 4.94-4.99GHz: 15 channel options 5.25-5.35Ghz: 34 channel options 5.47-5.72GHz: 89 channel options 5.725-5.85GHz: 44 channel options (Local regulations apply)	Real-time signal strength monitor 64QAM, 16QAM, QPSK, and BPSK modulation Receive Sensitivity: -73 to -91 dBm Radio Output Power - Factory configurable to 21 dBm AC Power Supply (Input: 100-120V AC, 50-60Hz, Output: 5V, 2.0 Amps). Full range 100-220v option also available.

Indoor Radios/Kits
Part No.	Model No.	Description
82-6788	AI108-4958-KIT	5GHz Complete Bridge Kit (2 Bridges, 2 Directional Antennas, 2-25ft. cables)
82-6789	AI108-4958-1	5GHz 1/2 Bridge Kit (1 Bridge, 1 Directional Antenna, 1-25ft. cable)
82-6790	AI108-4958-N	5GHz Bridge Only (N-type connector, No Antenna, No cable)
82-6805	4850-POE	PoE Kit for 4958 series

82-7909	AI108-4958-KIT-PS	4.9GHz Complete Bridge Kit (2 Bridges, 2 Directional Antennas, 2-25ft. antenna cables)
82-7910	AI108-4958-1-PS	4.9GHz 1/2 Bridge Kit (1 Bridge, 1 Directional Antenna, 1-25ft. antenna cable)
82-7911	AI108-4958-N-PS	4.9GHz Bridge Only (N-type connector, No Antenna, No cable)
82-6805	4850-POE	PoE Kit for 4958 series

Point-to-Multipoint Bridges - Indoor/Outdoor • Base Requires Sector or Omni Antenna • Base Station Unit, power supply, and 150ft. CAT 5e cable included w/ Base
82-6807 (AI108-4958-BSU)	5GHz Point-to-Multipoint Bridge Base (Requires Sector or Omni antenna)
82-6807-L	Includes installed PoE lightning suppression
82-6812 (AI108-4958-OSU)	5GHz Single Outdoor Bridge Subscriber (w/ 150ft. CAT 5e cable, 23 dBi antenna)
82-6812-L	Includes installed PoE lightning suppression
82-6811 (AI108-4958-SU)	5GHz Single Indoor Bridge Subscriber (w/ 25ft. antenna cable, 23 dBi antenna)
82-6811-L	Includes installed PoE lightning suppression
82-6813 (AI108-4958-ON2-150)	5 GHz Repeater (w/ 150ft. PoE cables, 2 x N-Female connectors, requires antennas)
82-6813-L	Includes installed PoE lightning suppression
Public Safety Use Only
82-7900 (AI108-4958-BSU-PS)	4.9GHz Point-to-Multipoint Bridge Base (Requires Sector or Omni antenna)
82-7900-L	Includes installed PoE lightning suppression
82-7902 AI108-4958-OSU-PS	4.9 GHz Single Outdoor Bridge Subscriber (w/ 150ft. CAT 5e cable, 23 dBi antenna)
82-7902-L	Includes installed PoE lightning suppression
82-7903 AI108-4958-SU-PS	4.9 GHz Single Indoor Bridge Subscriber (w/ 25ft. antenna cable, 23 dBi antenna)
82-7903-L	Includes installed PoE lightning suppression
82-7901 AI108-4958-ON2-150-PS	4.9 GHz Repeater (w/ 150ft. PoE cables, 2 x N-F connectors, requires Antennas)
82-7901-L	Includes installed PoE lightning suppression
82-7904 AI108-4958-MSU-PS	4.9 GHz Mobile Subscriber Unit (w/ MobileRoam firmware, ruggedized enclosure, mtg. bracket, 12VDC power, N-F connector, LEDs, 15 ft. Ethernet cable, requires antennas)
82-7904-L	Includes installed PoE lightning suppression
82-6787	Additional PoE Lightning suppressor 82-6787 are recommended for 150 and 300 foot cables

WirelessGRID™ 300Mbps Outdoor Wireless Backhaul Link (5.725-5.850 GHz, Up to 300 Mbps) Low-latency, high performance Backhaul (point-to-point) applications
• Integrated outdoor architecture for ease of installation, configuration, use and management. • Data rates up to 300 Mbps per radio utilizing adaptive modulation while operating on 20 or 40 MHz wide channels. • 3 x 3 MIMO Radio provides up to three separate transmit and receive paths for radio signals, improving link reliability and performance.
Part No.	Model No	Description
82-6883	300-ONB	Single Outdoor Radio - Includes 1 radio bridge with Waterproof Bulkhead Ethernet Connector, 2 x N-type Female Connectors (no cables or antennas)

82-6884	300-ONB-24	Complete Backhaul kit - Includes 2 radio bridges with Waterproof Bulkhead Ethernet Connectors, N-type Female Connectors, 2 x 24 dBi Panel Antennas, 2 x 6ft RF Cables, and outdoor mounting brackets

82-6886	300-ONB-29	Complete Backhaul kit - Includes 2 radio bridges with Waterproof Ethernet Connectors, N-type Female Connectors, 2 x 29 dBi Parabolic Antennas, 2 x 6ft RF Cables, and outdoor mounting brackets

WirelessGRID™ Full-Duplex Backhaul Link
(4.90-5.850 GHz, Up to 216 Mbps)
Asymmetrical Full Duplex Backhaul (Point to Point) Network Links

Product Highlights

WirelessGRID Full-Duplex Point-to-Point backhaul links are based on AIRAYA’s patent pending AWBL dual-radio design for ultra-low latency asymmetric operation.
Integrated indoor/outdoor architecture for ease of installation, configuration, and management. Each end of the link contains two radios with dedicated transmit (Tx) and receive (Rx) paths for signaling rates up to 216 Mbps (TCP/IP data rates to 45 Mbps full-duplex)

Data rates up to 216 Mbps per link (108 Mbps in each direction) using AIRAYA’s AWBL (Asymmetrical Wireless Broadband Link) design, advanced bridging protocols, and 40, 20, 10, and 5 MHz wide channels for each Tx and Rx radio

SecureRF^TM mandatory radio authentication and unique 128- bit AES data encryption for each Tx and Rx path ensures a secure backhaul connection

Compatible with all standard 1000/100 Mbps Ethernet switches, routers, 802.11q, 802.11p VPN, Trunk and VoIP protocols.
Up to 1600 byte packets supported. Integrated VLAN support and bandwidth management

Single antenna design and real-time alignment tools simplify antenna alignment, optimizes link quality,
and maximizes system throughput

Remote power for installing WirelessGRID Outdoor Units up to 328 feet away from your network using power over Ethernet

Real-time monitoring of WirelessGRID displays signal strength, noise floor, data rate, bridge statistics, channels...

Part No.

Model No.

Description

82-7945

4958-FDD-24-050

Outdoor Full-Duplex Backhaul Link with 50 ft. PoE cables, 2 x 108 Mbps radios with dedicated asymmetrical transmit and receive paths, 2 x 24 dBi panel antennas, 4 x 6ft LMR-400 cables, PoE surge protection
Frequency: 5.25-5.85GHz

82-7945-PS