|
Your
Wireless and Connectivity |
![]() |
|
|
Please
phone 800-366-3780 to obtain a password to our reseller's section |
||
| 2.0 dBi Rubber Duck with Elbow |
|||||||
|
• Indoor
/ Outdoor • Adjustable Knuckle with 0° and 90° Detents • 5.5" length, 4.25" in 90° position |
||||||
|
|||||||
| 2.0 dBi Omni Table Top Antenna |
||||||||||
|
• Indoor
only • Table Top mount • Includes 42" of cable |
|||||||||
|
||||||||||
| 2.0 dBi Omni Diversity Antenna |
||||||||||
|
•
Diversity Antenna • Mounts to ceiling tile grid with clips • Rectangular size 5.25" X 2.75" • Two antenna cables go through tile • For indoor applications |
|||||||||
|
||||||||||
| 3.5 dBi Omni Ceiling Antenna |
||||||||||
| |
• Low
profile • Ceiling Mount • For drop ceiling or drywall ceiling • Mounts with two screws • 6" X 6" X 1.25" size |
|||||||||
|
||||||||||
| 3.5 dBi Omni Ceiling Grid
Antenna |
||||||||||
| |
• Low
profile design • Mounts to ceiling tile grid with clips • Approx. 4" X 4" X 1" • For indoor applications |
|||||||||
|
||||||||||
| 5.0 dBi Ceiling Mount Omni
Antenna |
|||||||
![]() |
• 5 dBi
Gain Omnidirectional Indoor antenna • 50 Watts Max. • Mounting hole size: 5/8", Max. ceiling thickness - 1" • Type N Female Connector |
||||||
|
|||||||
| 5dBi Omni Magnetic Mount
Antenna |
||||||||||
|
• High
gain for portable applications • Includes ground plane • Powerful 2" magnet • Approx. 5" high • Order any length up to 15' |
|||||||||
|
||||||||||
| 5dBi Omni Hole Mount Antenna |
||||||||||
|
• For
vehicle applications • For enclosures • 3/4" hole mount • "O" Ring Seal • Approx. 5" high • Order any length up to 15' |
|||||||||
|
||||||||||
| 5dBi Omni Pole Mount Antenna |
||||||||||
|
•
Beamwidth: 36° Vertical • Includes 1 ft cable and mounting clamp • 15" height |
|||||||||
|
||||||||||
| 5dBi Omni Ceiling Grid Mount
Antenna |
|||||||||||||
|
•
Includes bracket for ceiling grids • End mounts with 10-32 screw • Beamwidth: 36° Vertical • Includes 1 ft. cable • 13" length |
||||||||||||
|
|||||||||||||
| 7.0 dBi Omni Pole Mt. Antenna |
|||||||
| |
• Beamwidth:
18° Vertical • 7 dBi Antenna Gain • 5° downtilt • Type N Female Integrated Bulkhead Connector • Rugged, Lightweight and Waterproof • Stainless Steel Mounting Bracket fits 1"- 2" O.D. mast mounting |
||||||
|
|||||||
| 9.0 dBi Omni Pole Mount Antenna |
||||||||||||||||
| •
Beamwidth: 14° Vertical • 27" length • Includes hardware for up to 2" mast • Includes 1 ft. cable • 4 ft. cable option available • Integrated N-Female (82-5864) |
||||||||||||||||
|
||||||||||||||||
| 9 dBi Omni Pole Mt. Antennas |
||||||||||
| |
• Vertically
Polarized • Type N Female Integrated Bulkhead Connector • Rugged, Lightweight and Waterproof • 1" to 2" O.D. mast mounting |
|||||||||
|
||||||||||
| 12 dBi Omni Pole Mt. Antennas | ||
| Part No. | Description | Retail |
| 82-5326 |
2.4 GHz 12 dBi Omni, 3°
DT, Pole Mt. • Beamwidth: 7° Vertical , with 3° downtilt • Gain: 12 dBi • 48" long |
77.95 |
| 12 dBi Omni Pole Mount
Antenna |
|||||||
|
|
• Polarization:
Vertical • Length: 35.4" for 12dBi, and 63" for 15dBi. • Fiberglass radome • 3/4" - 15/16" Mast mounting |
||||||
|
|||||||
| 12dBi MP12 Quad Stack Omni
(2.4/5 GHz) Antenna |
|||||||
![]() |
• Multi-Polarized
Antenna • Compact Omni head design • Dual Band Frequency • Beamwidth: 360° Horizontal, 15° Vertical • Quad Stack improves gain to 12dBi • 7° Downtilt for height installation • Includes pole mount bracket for mast mounting up to 1.625" O.D. |
||||||
|
|||||||
| 13 dBi Horizontal Polarized
Omni Antenna |
|||||||
| |
• Horizontally
Polarized • Vertical beamwidth: 7 ° • 10 ° downtilt • 2" - 2.5" O.D. mast mounting • Size: 49" x 4" x 1" • Weatherproof • Rugged for long service life |
||||||
|
|||||||
| 15 dBi Omni Pole Mount
Antenna |
|||||||
|
|
• Polarization:
Vertical • Length: 35.4" for 12dBi, and 63" for 15dBi. • Fiberglass radome • 3/4" - 15/16" Mast mounting |
||||||
|
|||||||
| Single, Dual or Quad Stack
Sector (2.4/5 GHz) Antennas |
|||||||||||||
|
• N-Female • 2.4GHz (120° Beamwidth) or 5GHz (90° Beamwidth) • Pole mount bracket for mast mounting up to 1.625" O.D. (18dBi MP has 7° Downtilt) |
||||||||||||
|
|||||||||||||
| 2.4 GHz Directional Patch Antennas |
| 4.0 dBi Bi-Directional
Ceiling Antenna |
||||||||||
| |
•
Beamwidth: 75° Vertical, 100° Horizontal • For mounting to dropped ceiling rails - Clips to standard 1 inch ceiling tile rails OR mount to any flat ceiling through holes provided with screws (not included) • 3" X 2.5" X 0.45" • Includes 6 inch plenum-rated cable |
|||||||||
|
||||||||||
| 6.5 dBi Diversity Patch Antenna |
||||||||||
|
•
Indoor / Outdoor • Wall Mounting • Beamwidth: 53° Vertical, 80° Horizontal • 5" X 6.5" X 1" |
|||||||||
|
||||||||||
| 8.5 dBi Patch Antenna |
|||||||||||||
|
•
Indoor / Outdoor • Beamwidth: 60° Vertical, 75° Horizontal • 4" X 3.75" X 1.25" • Pole Mount Kit available • Horizontal Articulating Mount available |
||||||||||||
|
|||||||||||||
| 9.0 dBi Indoor Patch Antenna | |||||||||
| • 9 dBi gain • Desktop, Wall, Ceiling, Window Mounting • Universal Gimbel mount allows any antenna angle or rotation • Beamwidth: 70° Vertical, 70° Horizontal • Integrated SMA-Female connector • Includes 8 ft. of low loss cable with connection options (see below) • 4.25" x 3.5" x 1" • Base Size: 3.15" x 1" |
|||||||||
|
| 9.0 dBi Patch Antenna |
||||||||||||||||
|
•
Indoor / Outdoor • Wall Mounting • Beamwidth: 55° Vertical, 60° Horizontal • Includes 5 ft. of cable • 5" X 5" X 0.75" • Pole Mount Kit available |
|||||||||||||||
|
||||||||||||||||
| 12 dBi Mini-Directional Antenna |
|||||||
| |
•
Beamwidth: 34° Vertical, 65° Horizontal • Rugged and Weatherproof • Ultra Low Wind Loading and Ultra Low Visual Impact • Vertical or Horizontal Polarization • Type N Female Connector • 4" x 4" x 4" • Stainless Steel Bracket fits 1" to 1- 2/3" O.D. mast mounting |
||||||
|
|||||||
| 13 dBi Patch Antenna |
||||||||||
|
•
Beamwidth: 35° Vertical, 35° Horizontal • Includes hardware for up to 2.5" mast • Includes Pole Mount Kit • 8' X 9" X 1.5" |
|||||||||
|
||||||||||
| 13 & 14 dBi Panel Antennas |
||||||||||
| |
|
|||||||||
|
||||||||||
| 2.4 GHz Sector Antennas |
| 12-14.5 dBi Sector
Antennas |
|||||||||||||
|
•
0-20° Elevation Angle adjustment • Durable Radome • 1" to 2" O.D. mast mounting |
||||||||||||
|
|||||||||||||
| 9 & 16 dBi
120° Sector Antennas |
||||||||||
|
||||||||||
|
||||||||||
| 15 dBi & Adjustable Sector Antennas | ||||||||||||
| •
Durable Radome • 0-10° Elevation Angle adjustment |
||||||||||||
|
| 12 & 14 dBi 180° Sector Antennas | |||||||||
| • Vertically Polarized • Type N Female Integrated Connector • Stainless Steel Bracket tilt: Up or down 10° • Low Cost Weatherproof • 1" to 2" O.D. mast mounting |
|||||||||
|
| 2.4 GHz High Gain Yagi's / Panels / Parabolic Antennas |
| 8-18 dBi Panel Antennas | ||||||||||||||||||
| Optional: • Swivel Bracket |
||||||||||||||||||
|
| 13.5 dBi Yagi Antenna |
|||||||||||||
|
•
Beamwidth: 30° Vertical, 30° Horizontal • Includes hardware for up to 1.625" O.D. mast • Articulating mount available |
||||||||||||
|
|||||||||||||
| 14 dBi Panel Antenna | ||||||
| • Beamwidth: 22° Vertical, 3°
Horizontal • Includes 8" cable • Includes mast bracket • 12" x 12" x 1.5" |
||||||
|
| 14 dBi Backfire Antenna |
||||||||||
|
•
Aesthetic design for CPE installs (10" Dia.) • Optimized for 2.4 GHz ISM Band • Beamwidth: 26° Vertical, 26° Horizontal • 1" to 2" O.D. mast mounting • Cone bracket available for surface mounting • Full tilt and rotation adjustments • Pole or surface mount |
|||||||||
|
||||||||||
| 16 dBi Vagi Antenna |
|||||||||||||||||||
|
•
Beamwidth: 25° Vertical, 30° Horizontal • Adjustable 45° tilt bracket included • Die Cast aluminum alloy • 1" to 1.5" O.D. mast mounting • 22" x 3" x 4" |
||||||||||||||||||
|
|||||||||||||||||||
| 19 dBi 1ft. Flat Panel Antenna |
|||||||
| |
•
Beamwidth: 17.5° Vertical, 17.5° Horizontal • Integrated N-Female connector • Elevation adjusts up or down 45° • 1"-2" O.D. mast mounting • Size: 15" x 15" x 1" |
||||||
|
|||||||
| 19 dBi Parabolic Grid
Antenna |
||||||||||
|
•
Beamwidth: 17° Nominal • Adjustable tilt bracket included • Lightweight Welded Wire design • Up to 2.5" O.D. mast mounting • 23.6" x 16.7" x 9.5" |
|||||||||
|
||||||||||
| 20.7 dBi 2 ft. Parabolic Dish
Antenna |
||||||||||
|
•
Beamwidth: 14.5° Nominal • Supplied with easy alignment mount - feed assembly is front insertable. • Radome Kit available • +/-20° Elevation adjustment • 2.375" mast mounting standard, 1.9"-4.5" mount optional |
|||||||||
|
||||||||||
| 21.7 dBi 2ft. Flat Panel Antenna |
|||||||
|
•
Beamwidth: 10° Nominal • Antenna Radome is paintable • +/-20° Elevation adjustment • Includes 2ft. pigtail • 2.375" mast mounting standard, 1.9"-4.5" mount optional • Size: 2' X 2' |
||||||
|
|||||||
| 24.0 dBi Parabolic Grid Antenna |
||||||||||||||||
|
•
Beamwidth: 8° Nominal • Powdercoat paint finish • Die Cast aluminum alloy • Adjustable tilt bracket included • Up to 2.5" O.D. mast mounting • 24" X 40" X 16" • 5-Packs available |
|||||||||||||||
|
||||||||||||||||
| 24.3 dBi 3 ft. Parabolic
Dish Antenna |
||||||||||
|
•
Beamwidth: 9.5° Vertical, 9.5° Horizontal • 2.375" - 5" O.D. mast mounting • Radome Kit available |
|||||||||
|
||||||||||
| 26.7 dBi 4 ft. Parabolic Dish
Antenna |
||||||||||
|
•
Beamwidth: 7.2° Nominal • 4.5" Mast Mounting • Radome Kit available |
|||||||||
|
||||||||||
| 2.4 GHz Multi-Polarized Directional Beam Antennas |
| 12dBi MP Beam, 4" (2.4 GHz)
Antenna |
|||||||
|
•
Stainless steel construction, N-Female • Beamwidth: 60° Horizontal, 40° Vertical • Offers Multi-polarization and geospatial capture of signal • Improves signal strength and quality • Inconspicuous CPE use • Includes pole mount bracket |
||||||
|
|||||||
| 17dBi MP Beam, 18" (2.4 GHz)
Antenna |
|||||||
| •
Stainless steel construction, N-Female • Beamwidth: 40° Horizontal, 30° Vertical • Offers Multi-polarization and geospatial capture of signal • Improves signal strength and quality • Great for CPE or Point-to-Point Backhaul use |
|||||||
|
|||||||
| 17dBi MP Beam, 8-1/2" (5 GHz) Antenna | |||||||||
| • Stainless steel construction,
SMA-Female • Beamwidth: 40° Horizontal, 30° Vertical • Offers Multi-polarization and geospatial capture of signal • Improves signal strength and quality |
|||||||||
|
| 22dBi MP Tetrad Beam, 4x18"
(2.4 GHz) |
|||||||
|
•
Stainless steel construction, N-Female • Beamwidth: 20° Horizontal, 15° Vertical • Offers Multi-polarization and geospatial capture of signal • Improves signal strength and quality • Includes pole mount for up to 1.875" mast |
||||||
|
|||||||
| WISPer Central Site Antennas |
|||||||||||||
|
•
Three (3) 10dBi Sectors • 2.4GHZ or 5GHz • Kit includes mounting pole and tripod |
||||||||||||
|
|||||||||||||