Characteristic

Specification – Description

Range

   2.5dBi antenna

   11dBi antenna

   15dBi antenna

NLOS - Through walls:

   Up to 7 average walls

   Up to 10 average walls

   Up to 12 average walls

LOS – Clear Fresnel zone

   Up to 2 miles

   Up to 25 miles

   Up to 50 miles

RF transmission rate:

1.5 Mb/s

Throughput:

935 Kb/s

Output power:

+21dBm – (Up to 4 Watts EIRP with 15dBi antenna)

Receive sensitivity:

-101dBm at 10e-4 BER (Up to -113dBm with 15dBi antenna)

Latency:

< 1ms – assuming a dedicated wireless link to client device.

Current consumption:

Transmitting 260mA at 4.5V

Radio channels:

12 Non-overlapping

Automatic frequency select:

Yes – radio channel automatically selected and adaptively optimized

Status LEDs:

Power, RF Link, Ethernet Link, Traffic, RF RX, RF TX, 4/Channel and 6/Link Quality

MAC pass-through filter:

Yes – can be disabled

Temperature range

-40°C to 60°C

Power over Ethernet:

Compatible with common 5V splitters (Linksys WAPPOE)

Characteristic

Specification – Description

Range

   11dBi antenna

   15dBi antenna

NLOS - Through foliage:

   Up to 1 mile and 3 average trees

   Up to 2 mile and 4 average trees

LOS – Clear Fresnel zone

   Up to 25 miles

   Up to 50 miles

RF transmission rate:

1.5 Mb/s

Throughput:

935 Kb/s

Output power:

4 watts EIRP with 15dBi antenna - +21dBm at antenna port

Receive sensitivity:

-112 dBm at 10e-4 BER with 15dBi antenna

Latency:

< 2ms – assuming a dedicated wireless link to client device.

Current consumption:

Transmitting - 230mA at 4.5V

Radio channels:

12 Non-overlapping

Automatic frequency select:

Yes – radio channel automatically selected and adaptively optimized

Status LEDs:

Power, RF Link, Ethernet Link, Traffic, RF RX, RF TX, 4/Channel and 6/Link Quality

Enclosure Type:

NEMA 4X

Temperature range:

-40°C to 60°C

Power over Ethernet:

Proprietary 6/12 volt system - Includes injectors/power supplies

Up to 100ft of Ethernet cable – recommended part# AW100FT.