10/12/2010

fibeairlogo.jpg (5497 bytes)
Licensed Ethernet Bridges
FibeAir™ Family
FibeAir® 1500P family of high capacity products answers the need for a future-proof, efficient wireless networking solution - and ensures backhaul profitability. State-of-the-art technology and a common hardware platform supporting multiple capacities, frequencies and configurations, make the FibeAir 1500P solution ideal for a broad range of network applications.

Upgradeable for capacities ranging from 45 to 622 Mbps, FibeAir 1500P supports a wide range of deployment scenarios and network topologies. FibeAir 1500P includes a variety of interfaces and can be seamlessly integrated into a variety of networks. The system can be installed in split-mount and all-indoor configurations, for long, medium and short haul transmission, with multiple protection schemes.
 
  • Configurable capacities and throughput
    45-622 Mbps, single or dual carriers over 10-56 MHz channels
     
  • Variety of interfaces
    n x STM-1/OC-3, n x DS3
     
  • Multiple Configurations
    1+0, 2+0, 4+0, 1+1, 2+2, frequency and space diversity,
    East-West (EW) and XPIC (Cross Polarization Interference Canceller)
     
  • Modular & compact
    1U indoor unit
     
  • Comprehensive spectrum range
    Full capacity over all 6-38 GHz frequency bands

 
  • Double the capacity per given channel bandwidth
    Using XPIC for co-channel, dual polarization configuration
     
  • Multiple network topology support
    Ring, Mesh, Chain, Star and Tree
     
  • Standard compliance
    ETSI, FCC, IC, ITU-T and IEEE standards and frequency plans, for operation worldwide
FibeAirP™ 1500P/IPMAX2 GigE Radio - Upgradeable from 100 Mbps to 800 Mbps
 
Order with one or more modules listed below:

Main Channel: 100 Mbps to GigE (over 800 Mbps)
Wayside:  64Kbps 10BaseT or 2xT1 (for OC-3 IDM only)
Frequency:  Specify 6 GHz, 7 GHz, 11 GHz, 18 GHz, 23 GHz, or 38 GHz
Modulation:  32 to 256 QAM - software configurable
Links include:  ODUs (2), IDUs (2, equipped with wayside 10BaseT), and GUI Software for Windows.  Dual Module systems include 4 ODUs
Requires:  (2) Antenna Cables, (4) Jumper Cables, (4) Lightning Suppressors, (2) Power Supplies, and (2) Single-Polarized Antennas per link. 
(Dual Module systems: Double the requirements above)

                                    

General Information
32 QAM, Single Carrier




Specification
6 GHz  7/8 GHz  11 GHz  18 GHz  23 GHz
Transmit Power 32 QAM 26 dBm  26 dBm  20 dBm  20 dBm  20 dBm
Tx Attenuation Range 32 QAM 30 dB  30 dB  30 dB  30 dB  30 dB
Receiver Sensitivity (BER=10-6) 32 QAM -74 dBm -74 dBm  -74 dBm  -74 dBm  -73 dBm

128/256 QAM, Single Carrier
18-38 GHz

Specification 18 GHz 23 GHz
Transmit Power 128 QAM/256 QAM 17/18 dBm 17/17 dBm
Tx Attenuation Range 128/256 QAM 25 dB 25 dB
Receiver Sensitivity (BER=10-6) 128QAM/256 QAM -65/-60 dBm -61/-61 dBm
 

 

Ceragon Radio Installation Schematics

Single Mode

East / West Configure                             

Dual Mode


Purchase by link:
Part No. Description

Please phone
888-245-8363
for
Ceragon
 pricing
82-7312-xxx IPMAX2 100 Mbps Ethernet/GigE Radio (2 units)
82-7312-xxx IPMAX2 100 Mbps +8xT1 Ethernet/GigE Radio (2 units)
82-7312-xxx IPMAX2 200 Mbps Ethernet/GigE Radio (2 units)
82-7312-xxx IPMAX2 200 Mbps +8xT1 Ethernet/GigE Radio (2 units)
82-7312-xxx IPMAX2 300 Mbps Ethernet/GigE Radio (2 units)
82-7312-xxx IPMAX2 300 Mbps +8xT1 Ethernet/GigE Radio (2 units)
82-7312-xxx IPMAX2 400 Mbps Ethernet/GigE Radio (2 units)
82-7312-xxx IPMAX2 400 Mbps +8xT1 Ethernet/GigE Radio (2 units)
82-7322-xxx FibeAirP™ OC-3 155Mbps Radio (2 units)
82-7322-xxx FibeAirP™ DS3 45Mbps Radio (2 units)
   
Extended Warranties - FibeAirP™ 1500P
AR-7322-xxx 1 Year Extended Warranty
AR-7322-xxx Extended Warranty/Advanced Replacement - Years 2-5
OR purchase by piece:
Chassis (Two per link)
82-7317XXX FibeAirP™ Chassis (requires two per link)
IDC (Two per link)
82-7621 IPMAX2 Controller for Ethernet/GigE
82-7635OC3 1500P Controller with OC-3
82-7635OCT 1500P Controller with OC-3 2xT1
IDM (Two per link) (^Requires one SFP Interface Module per IDM)
w/ IPMAX2 IDC: Description
w/ OC3 or OCT IDC: Description
82-7623100^ 100BTX IDM Ethernet/GigE 82-7627-MM OC-3 Multi-Mode IDM (SC)
82-762310T^ 100BTX IDM Ethernet/GigE + 8xT1 82-7627-SM OC-3 Single Mode IDM (SC)
82-7623200^ 200BTX IDM Ethernet/GigE 82-7637-MM 2xOC-3 Multi-Mode IDM (SC)
82-762320T^ 200BTX IDM Ethernet/GigE + 8xT1 82-7637-SM 2xOC-3 Single Mode IDM (SC)
82-7623300^ 300BTX IDM Ethernet/GigE 82-76381DS 1xDS-3 IDM (mini BNC)
82-762330T^ 300BTX IDM Ethernet/GigE + 8xT1 82-76383DS 3xDS-3 IDM (mini BNC)
82-7623400^ 400BTX IDM Ethernet/GigE    
82-762340T^ 400BTX IDM Ethernet/GigE + 8xT1    
ODU (Two per link)  
82-7325-EXL* 11 GHz Upper Band TX Low
82-7325-EXH* 11 GHz Upper Band TX High
82-7325-FXL* 11 GHz Lower Band TX Low
82-7325-FXH* 11 GHz Lower Band TX High
82-7325-IXL 18 GHz TX Low
82-7325-IXH 18 GHz TX High
82-7325-JXL 23 GHz Upper Band TX Low  
82-7325-JXH 23 GHz Upper Band TX High
82-7325-KXL 23 GHz Lower Band TX Low
82-7325-KXH 23 GHz Lower Band TX High
82-7319-SPL* 6/7/8 GHz TX Low
82-7319-SPH* 6/7/8 GHz TX High
High Power models available, call for details.
Accessories      
         
82-7302 Ceraview Software (one per link)    
82-7633-ET SFP Ethernet 1000B-T GBIC for IPMAX2 (one per IDM)    
82-7633-SX SFP Optical Interface GBIC for IPMAX2 IDM (one per IDM)    
82-7611 1500P Blank Face Plate (one per IDU if one IDM used)    
82-7606 Lightning Suppressor (Need 2 per IDU/ODU)    
82-7607 AC to DC Power Supply, 110VAC to 48VDC  (need 1 per IDM)    
82-7641 8xT1 Break Out Cable 36p to leads   (need 1 per 8xT1 IDM)    
82-6366-xx IDU to ODU Ready-to-Install Antenna Cable    
(LMR-400, N-Male to Male)  (Specify any length: add +.90/ft beyond 10 ft) 
82-7572-xx SORAM-xx 11/18/23/38Ghz (order waveguide separately)    
Single ODU Remote Antenna Mount: Standard Antenna Required
82-7573-xx PORAM-xx 11/18/23/38Ghz (order waveguide separately)    
Dual ODU, Single Antenna Mount: Single (or Dual) Polarization
  Antenna Required; with Standard Interface (Requires Protection Kit)    
82-7574-xx POSAM-xx 11/18/23/38Ghz (no waveguide needed)    
Dual ODU Single Antenna Mount: Ceragon interface required
  (Requires Protection Kit)    
  Protection Kits or 1+1 configuration (per terminal) includes:     
  • IDU to IDU Interconnection cable Basic- 1 unit    
  • Main Channel Protection Cable-1 or 2 units    
  • Way Side Channel Protection Kit-1 unit (optional)    
  • Management Kit - 1 unit (optional)    
FibeAir™ Antenna Options (Ceragon Interface) -R = Radio Waves (default) -A = Andrew
Part No. Description Estimated Range (at 99.995% reliability)    
82-7351R23 23 GHz 1 ft. Antenna** - 35.1 dBi Up to 3.4 miles     
82-7352R23 23 GHz 2 ft. Antenna  - 40.2 dBi Up to 4.7 miles     
82-7352R18 18 GHz 2 ft. Antenna** - 38.6 dBi Up to 6.2 miles     
82-7353R23 23 GHz 3 ft. Antenna  - 43.7 dBi Up to 5.8 miles     
82-7353R18 18 GHz 3 ft. Antenna  - 42 dBi Up to 7.8 miles     
82-7353R11 11 GHz 3 ft. Antenna** - 36.9 dBi Up to 12.0 miles     
82-7354R23 23 GHz 4 ft. Antenna  - 46.2 dBi Up to 6.7 miles     
82-7354R18 18 GHz 4 ft. Antenna  - 44.5 dBi Up to 9.2 miles     
82-7354R11 11 GHz 4 ft. Antenna  - 39.4 dBi Up to 14.5 miles     
82-7356R18 18 GHz 6 ft. Antenna  - 48 dBi Up to 11.0 miles     
82-7356R11 11 GHz 6 ft. Antenna  - 42.5 dBi Up to 19.0 miles     


Links:

    
IP-10 4800 2000

e-mail: 
Phone: 888-245-8363

Return to Connectronics Home Page