10/28/2011
|
|
|
| 802.11g Wireless Access Points / CPEs / USB Dongles | |
| 10/100 Mbps (Auto-Sensing) Fast Ethernet Switch | |
| Gigabit Switches | VDSL Converters |
| Stack / Routing / VLAN Gigabit Switches | PCI LAN Adapter |
| Part No. | Description | User Cost | Dealer Cost | |
| 29-8137 | WAP-8000 |
802.11a/b/g
Wireless LAN Outdoor CPE / AP• IEEE 802.11a/b/g standards compliant • Provides protection against rigorous weather conditions • Wide range of temperature tolerance for low or high temperature environment • High output power up to 400mW with multiple adjustable transmit power control • Data rate up to 108Mbps with Super A/G mode • N-type Antenna connector for various installations • Multiple Wireless Access Modes: AP, AP Client, Bridge, WISP • MAC filtering • Supports WEP 64/128, WPA- PSK, WPA2-PSK Authentication • SNMP management • Power over Ethernet design (includes proprietary injector and power cube) |
350.00
|
269.00 |
|
|
||||
| 29-8138 | WAP-6200 |
802.11g Wireless LAN Outdoor CPE / AP / Router with integrated antenna |
210.00 | 159.00 |
|
|
•
IEEE 802.11b/g Dual Standards compliant• Provides protection against rigorous weather conditions • Default 200mW output power, 5 levels of adjustable transmit power control • Built-in 14dBi patch Antenna • Multiple Wireless Access Modes: AP, Client, WDS, AP+WDS, Repeater • Two Operating Modes: Gateway, Bridge, WISP • Supports SPI Firewall, QoS functions • MAC / IP / URL filtering • Supports WEP, WPA, WPA2, 802.1x Authentication • Web base configuration • Power over Ethernet design (includes proprietary injector and power cube) |
|
||
| 29-8238 | WAP-4060PE | 802.11g Wireless LAN Managed Access Point with PoE | 119.00 |
|
![]() |
• Wireless LAN IEEE802.11b/g compliant • Supports PoE port (IEEE802.3af compliant) • Supports IEEE802.11d standard (Worldwide mode) • Strong network security with 802.1X authentication, and 64/128-bit WEP encryption • Supports WPA (Wi-Fi Protected Access) for both 802.1x and WPA-PSK • One detachable reverse-polarity SMA connectors can connect to external antenna for expanding connection distance • Super G mode efficiently raises the data transfer rate up to 108Mbps • Five operation modes selectable: AP / AP Client / Wireless Bridge / Multiple Bridge / Repeater • Adjustable output power level • Support Multiple SSIDs, Multiple SSID isolation, 802.1Q VLAN, RADIUS MAC authentication, Rogue AP detection, Access Control • Provide Windows-base utility, Web, and CLI (Command Line Interface) Configuration • SNMP support, Includes power cube |
DataSheet | 69.00 | |
| 29-8274 | WNL-U554A |
802.11g USB Adapter with Rubber Duck antenna• Compliant with IEEE 802.11b, IEEE 802.11g, IEEE 802.11n • Mini-Size Design • USB 2.0 attached interface • Detachable RP-SMA connector with 3dBi dipole antenna • Provides up to 150Mbps download and 150Mbps upload data rate • Supports Wi-Fi Protected Setup (WPS) • Supports WEP 64/128, WPA, WPA-PSK, WPA2, WPA2-PSK, LEAP • Cisco CCX support • Supports QoS-WMM (WiFi Multi-Media) function / WMM-PS • Supports Software AP mode • Supports most operating systems including Windows 2000 , XP, Vista and Windows7 |
49.00 |
33.00 |
|
|
||||
| 29-8237 | WL-356A |
802.11g USB Adapter (5 ft. cable) with RP-SMA Connector
and Rubber Duck
antenna • High data transfer rate - up to 54Mbps• Supports WEP 64/128/256 Bits, WPA protection • Supports Infrastructure and Ad-Hoc mode • Software AP function support • Data rate automatic fallback increases reliability • 5 ft. cable allows repositioning unit for best performance |
29.00
|
39 20.00 |
| Part No. | Description | User Cost | Dealer Cost | |||
| 29-8154
|
FSD-503 |
5-Port
10/100Base-TX Switch (Desktop) • Flow Control support in half-duplex mode • 1K/2K MAC Address Table |
DataSheet | 45.00 |
29.00 |
|
| 29-8148 | ISW-501T | 5-Port
10/100Base-TX Industrial Switch for Wide Temperature
Operation • 5-Port 10/100Mbps RJ-45 with auto MDI / MDI-X function • Requires power supply (+12 to 48VDC) • Temperature range: -40°C to +75°C • DIN rail mountable |
|
DataSheet | 109.00 | 79.00 |
| 29-8265 | GSD-503 |
5
Port 10/100/1000 Gigabit Ethernet Switch• IEEE802.3x, full duplex flow control compliant; back-pressure, half duplex flow control • Per port auto-MDI-X detection • 8K MAC address table auto-ageing, 112K bytes packet buffer |
DataSheet | 85.00 | 59.00 | |
| 29-8149 | IGS-501 |
5-Port 10/100/1000Mbps Industrial
Gigabit Ethernet Switch
• 5-Port 10/100/1000Base-T RJ-45 with auto MDI/MDI-X function • Requires power supply (+12 to 48VDC) • Temperature range: -10°C to +60°C • DIN rail mountable |
|
DataSheet | 159.00 | 119.00 |
| 29-8283 | IGS-801M | 8-Port 10/100/1000Mbps Industrial
Gigabit Managed Switch • 8-Port 10/100/1000Base-T RJ-45 with auto MDI/MDI-X function • Remote Web-based management • Access through SNMP v1, v2c • Requires power supply (+12 to 48VDC) • Temperature range: -10°C to +60°C • DIN rail mountable |
![]() |
DataSheet | 249.00 | 179.00 |
| 29-8163 |
FSD-800 |
8-Port
10/100Base-TX Switch • Flow Control support in half-duplex mode • 1K/2K MAC Address Table |
DataSheet | 70.00 |
49.00 |
|
| 29-8271 | WGSD-1022C |
8-Port
10/100Mbps + 2-Port Gigabit TP/SFP Combo Managed Switch
• 802.1Q VLAN • Rapid Spanning Tree • SNMP / SNMP Trap • IGMP Snooping • SFP slots, Fiber link capability |
DataSheet | 195.00 | 139.00 | |
| 29-8223 | FSD-1601ST |
16-Port
10/100Base-TX Switch with 1 shared 100Base-FX (ST) Port• Complies with IEEE 802.3 10Base-T standards, IEEE.3u 100Base-TX • Optional 100Base-FX port, ST interface, multimode fiber optic connection. • Supports up to 6,560 ft. (2km) multimode fiber |
DataSheet | 189.00 |
130.00 89.00 |
|
| 29-8199 | FNSW-1601 |
16-PORT
10/100Base-TX Switch • Auto-negotiation 10/20Mbps, 100/200Mbps • Filtering/Forwarding Rate: 148800pps for 100Mbps, 14880pps for 10Mbps • Switching Fabric: 4.2 Gbps |
DataSheet | 129.00 | 89.00 | |
| 29-8212 |
FNSW-2401 |
24-PORT
10/100Base-TX Switch • Auto-negotiation 10/20Mbps, 100/200Mbps • Filtering/Forwarding Rate: 148800pps for 100Mbps, 14880pps for 10Mbps • Switching Fabric: 4.2 Gbps |
DataSheet | 159.00 |
109.00 |
|
| 29-8202 |
FNSW-4800 |
48-PORT
10/100Base-TX Switch • Auto-negotiation 10/20Mbps, 100/200Mbps • Filtering/Forwarding Rate: 148800pps for 100Mbps, 14880pps for 10Mbps • Switching Fabric: 4.2 Gbps |
DataSheet | 299.00 |
209.00 |
|
| Gigabit Ethernet Switches | ||||
| Part No. | Description | User Cost | Dealer Cost | |
| 29-8265 | GSD-503 |
5-Port 10/100/1000 Gigabit Ethernet Switch• IEEE802.3x, full duplex flow control compliant; back-pressure, half duplex flow control • Per port auto-MDI-X detection • 8K MAC address table auto-ageing, 112K bytes packet buffer |
85.00
|
59.00 |
| 29-8149 | IGS-501 |
5-Port 10/100/1000 Industrial
Gigabit Ethernet Switch• 5-Port 10/100/1000Base-T RJ-45 with auto MDI/MDI-X function • Requires power supply (+12 to 48VDC) • Temperature range: -10°C to +60°C • DIN rail mountable |
159.00
|
119.00 |
| 29-8283 | IGS-801M |
8-Port 10/100/1000Mbps Industrial
Gigabit Managed Switch• 8-Port 10/100/1000Base-T RJ-45 with auto MDI/MDI-X function • Remote Web-based management • Access through SNMP v1, v2c • Requires power supply (+12 to 48VDC) • Temperature range: -10°C to +60°C • DIN rail mountable |
249.00 DataSheet |
179.00 |
| 29-8246 |
GSW-1601 |
16-PORT 10/100/1000
Gigabit Ethernet
Switch • Comply with IEEE 802.3, 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T Ethernet standard • 16 10/100/1000Mbps Gigabit Ethernet ports • Features Store-and-Forward mode with wire-speed filtering and forwarding rates • Hardware based 10/100Mbps, half / full duplex and 1000Mbps full duplex mode, flow control and auto-negotiation • IEEE 802.3x flow control for full duplex operation and Backpressure for half duplex operation • Integrated address look-up engine, supports 8K absolute MAC addresses • 9K Jumbo packet support • Automatic address learning and address aging • Supports Auto MDI/MDI-X function • Supports CSMA/CD protocol |
270.00 | 189.00 |
|
29-8250 |
GSW-2401 |
24-PORT 10/100/1000
Gigabit Ethernet
Switch |
298.00 |
209.00 |
| Stackable / VLAN 10/100/Base-Tx & Gigabit Switches | |||||||||
| Part No. | Description | User Cost | Dealer Cost | ||||||
| 29-8256
|
WGSW-2840 | 24-Port
10/100Mbps + 4G TP/SFP Combo Managed Stackable Switch
• 24-Port 10/100Mbps TP interfaces • 4-Port Gigabit TP/SFP combo interface • Complies with IEEE802.3, 10Base-T, IEEE802.3u, 100Base-Tx, IEEE 802.3ab 1000Base-T, IEEE 802.3z 1000Base-LX/SX Ethernet standards • High back-plane bandwidth 12.8Gbps • Console/Web/SNMP management • Configuration backup and recovery • Per port Ingress/Egress bandwidth restriction • 802.1d Spanning tree, 802.1w Rapid Spanning Tree • Configurable spanning tree aging time, STP port configuration • 12 trunk groups, up to 8 ports per trunk • Port-based/802.1Q VLAN with 4K VLAN ID • MAC Binding/Filtering/Learning, configurable MAC Aging time |
|
449.00 |
319.00 |
||||
|
|
|||||||||
| • 8 mappings ID
to 4 priority queues, Support MAC/VLAN/802.1p/Port to CoS mapping • IGMP snooping and IGMP Query mode for Multi-media application • Statistic Routing Port • 1 to many Ingress/Egress Port mirror and Port analysis • Broadcast/Multicast/Flooded storm control • IP Stacking management, up to 8 units |
|||||||||
| 29-8271 | WGSD-1022C |
8-Port
10/100Mbps + 2-Port Gigabit TP/SFP Combo Managed Stackable Switch
• IP Stacking up to 8 units • 802.1Q VLAN • Rapid Spanning Tree • SNMP / SNMP Trap • IGMP Snooping • SFP slots, Fiber link capability |
195.00 DataSheet |
139.00 | |||||
| Part No. | Description | User | Dealer | |||
| 29-8269 | MC-1500 |
15-Slot
Media Converter Chassis • High quality 19" Rack-Mountable Chassis installation • Supports up to fifteen (15) modular media converters • Two fans brings the air-flow for system cooling, and LED indicators for system and fan status • Bay power isolation, ensure each bay is electrically isolated from each other • Support multiple converters - 10/100/1000Mbps, copper, Fiber, single/multi-mode ST/SC/MTRJ connectors • Reduce the effort of converter maintenance and management, diagnose the status at one time • Cost-effective, easy to install |
279.00 | 199.00 | ||
| DataSheet | ||||||
| Multimode Fiber Converters | ||||||
| 29-8118 | FT-801 |
10/100Base-TX
to 100Base-FX (ST) Fast Ethernet Converter• Supports up to 1350 ft. multimode fiber • Operates stand-alone or in MC-1500 Chassis (29-8269)
|
99.00 | 69.00 | ||
| 29-8119 | FT-802 | 10/100Base-TX to 100Base-FX (SC) Fast Ethernet Converter • Supports up to 1350 ft. multimode fiber • Operates stand-alone or in MC-1500 Chassis (29-8269) |
99.00 | 69.00 | ||
| 29-8242 | GT-802 | 10/100/1000Base-T to 100Base-SX (SC) Multimode Gigabit Converter • Supports up to 721 ft. with 62.5/125 multimode fiber • Supports up to 1640 ft. with 50/125 multimode fiber • Operates stand-alone or in MC-1500 Chassis (29-8269) |
169.00 DataSheet |
119.00 | ||
| 29-8272 | GT-705 | 1000BaseT to 1000Base-SX (LC) Multimode Gigabit Converter • Supports up to 721 ft. with 62.5/125 multimode fiber • Supports up to 1640 ft. with 50/125 multimode fiber |
229.00 DataSheet |
159.00 | ||
| 29-8249 | GT-705A |
Gigabit Ethernet Media Converter •
One-channel media conversion between 1000Base-T and 1000Base-SX/LX• Provides one SFP (mini-GBIC) slot supporting either multi-mode or single mode fiber, flexibility in Gigabit Ethernet fiber-optic wiring with different SFPs installed • Auto MDI/MDI-X for TP port • Operates stand-alone or in MC-1500 Chassis (29-8269)
|
129.00 DataSheet
|
89.00 | ||
| Singlemode Fiber Converters | ||||||
| 29-8240 | FST-802S15 | 10/100Base-TX to 100Base-FX (SC) Singlemode Fiber Converter 15 Km • Supports up to 9.31 miles (15 km). with 9/125 singlemode fiber • Operates stand-alone or in MC-1500 Chassis (29-8269) |
119.00 | 79.00 | ||
| 29-8241 | FT-802S50 | 10/100Base-TX to 100Base-FX (SC) Singlemode Fiber Converter 50 Km • Supports up to 31 miles (50 km). with 9/125 singlemode fiber • Operates stand-alone or in MC-1500 Chassis (29-8269) |
179.00 | 129.00 | ||
| 29-8243 | GT-702S | 1000Base-T to 1000Base-LX (SC) Singlemode Gigabit Converter
• Supports up to 6.21 miles (10 km). with 9/125 singlemode fiber • Operates stand-alone or in MC-1500 Chassis (29-8269) |
229.00
|
159.00 | ||
| 29-8249 | GT-705A |
Gigabit Ethernet Media Converter |
129.00 DataSheet
|
89.00 | ||
| Part No. | Description |
User Cost |
Dealer Cost |
|||||
| 29-8280 | VC-201 |
100Mbps Ethernet over VDSL2 Converter • Send ethernet data over existing copper telephone lines without rewiring • Voice and data communication can be shared simultaneously • Cost-effective VDSL2 CO / CPE bridge solution, CO / CPE selectable via DIP Switch • Two RJ-11 connectors for each VDSL port, one for VDSL connection and one for POTS connection • Supports extensive LED indicators for network diagnostics • Supports Profile 12a • Operates at 100/55 mbps asymmetric data rate to 656 ft. (200m) • Operates at 30/6 mbps asymmetric data rate to 3280 ft. (1km) • Easily set up point-to-point connection with one pair of converters |
170.00 |
|
||||
![]() |
||||||||
| 29-8281 | VC-201A | 100Mbps Ethernet over VDSL2 Converter |
170.00 |
119.00 | ||||
• Send ethernet data over existing copper
telephone lines without rewiring
• Voice and data communication can be shared simultaneously • Cost-effective VDSL2 CO / CPE bridge solution, CO / CPE selectable via DIP Switch • Two RJ-11 connectors for each VDSL port, one for VDSL connection and one for POTS connection • Supports extensive LED indicators for network diagnostics • Supports Profile 17a • Operates at EXTENDED DISTANCE in asymmetric mode 100/55 Mbps asymmetric data rate to 656 ft. (200m) 25/4 Mbps asymmetric data rate to 5,248 ft. (1.6km) • Operates at EXTENDED DISTANCE in symmetric mode 90/90 Mbps symmetric data rate to 656 ft. (200m) 20/15 Mbps symmetric data rate to 5,248 ft. (1.6km) • Easily set up point-to-point connection with one pair of converters |
|
|||||||
| 29-8282 | VC-234 | 100Mbps Ethernet (4-port LAN) over VDSL2 Converter |
198.00 |
138.00 |
||||
|
• Includes 4-port 10/100 base-TX hub • Send ethernet data over existing copper telephone lines without rewiring • Voice and data communication can be shared simultaneously • Cost-effective VDSL2 CO / CPE bridge solution, CO / CPE selectable via DIP Switch • Two RJ-11 connectors for each VDSL port, one for VDSL connection and one for POTS connection • Supports extensive LED indicators for network diagnostics • Supports Profile 17a & 30a • Operates at 100/100 mbps symmetric data rate to 984 ft. (300m) • Operates at 20/4 mbps asymmetric data rate to 4592 ft. (1.4km) • Easily set up point-to-point connection with one pair of converters |
![]() |
|||||||
Ph:
800-366-3780
E-mail:
Return
to Connectronics Home Page