AirEitherTM Grid
Antenna GA Series
|
The AirEther Grid
antennas are sturdy and durable, because the antennas
are made with stainless steel with extra rust-proof coating unlike
those simple type Aluminum-made antennas in the market. Inscape Data is
confident that our customers will be able to rely on the antenna
quality and operate reliably and satisfactorily.
|
|
|
Part No.
|
Description
|
|
Retail
|
| 82-3242 |
25 dBi Grid
AirEther™antenna |
 Data Sheet
|
297.00 |
|
|
AirEitherTM Panel
Antenna PA Series
The AirEther line of
Panel Directional Antenna offers 8, 12, 16, 18, and 21 dBi gain with 3
key benefits for various IEEE 802.11 b/g short distance (e.g., 1 to 2
miles) or long-haul
(e.g., over 10 miles) wireless communications: such as 802.ll b/g
Access Points or Wireless Bridge/Routers. First, it delivers extended
wireless access point range in a single floor environment with the
antenna, ideally, secured at a corner of the building floor. Secondly,
the antenna can be used for a point-to-point network, so that you can
wirelessly connect LANs between the buildings in a campus-type
environment
or between two remote areas. Thirdly, it provides multi-floor
transmission
when placed on a ceiling, as the higher power output extends the range
through typical flooring materials. The antenna package includes
several
mounting options, such as fixed, wall adjustable, and pole.
|
| 82-3244 |
8 dBi Panel AirEther™antenna |
Data Sheet
|
60.00 |
| 82-3245 |
12 dBi Panel
AirEther™antenna |
Data Sheet
|
85.00 |
| 82-3246 |
16 dBi Panel AirEther™antenna |
Data Sheet
|
111.00 |
| 82-3247 |
18 dBi Panel
AirEther™antenna |
Data Sheet
|
124.00 |
|
82-3249
|
Swivel Bracket for
Panel antenna
|
|
19.00
|
| |
The SB01 Swivel Bracket
can be used for AirEther Panel and Sector Antennas. The bracket is made
of stainless steel and comes with two adjustable arms. The SB01
simplifies the antenna installation substantially, when the
installation requires repetitive adjustments on the antenna until an
optimal alignment between two antennas is reached .
|
|
|
AirEitherTM Yagi Antenna YA
Series
|
The AirEther line
of Yagi Directional Antennas offers 15, 16, and 20 dBi gain with
a focus beam-width. The Swivel Mount for YAGI antenna constructed of
weather resistant material. The directional characteristics allow the
antenna to adjust its transfer and receiver angle, it is very suitable
for outdoor building to building use (different height).
|
| 82-3252 |
15 dBi Yagi
AirEther™antenna |
Data Sheet
|
115.00 |
82-3255
|
20 dBi Yagi
AirEther™antenna
|
Data Sheet
|
166.00
|
|
AirEitherTM
Omni Antenna OA Series
The AirEther line of Omni Directional Antennas
offers 8, 12, and 15 dBi gain, and the Omni directional antenna is
designed to radiates radio-frequency energy equally in all directions
for widespread and all-points wireless deployment. This antennas
is specially useful in optimizing coverage when you want to place your
wireless access point or router out of plain view-in a wiring closet
or above a ceiling pad.Inscape Data offers three different types of
Omni antennas:
|
| 82-3256 |
8 dBi Omni
AirEther™antenna
Data Sheet
|
  
|
75.00 |
82-3257
|
12 dBi Omni AirEther™antenna
Data Sheet
|
122.00
|
| 82-3258 |
15 dBi Omni
AirEther™antenna
Data Sheet
|
198.00 |
|
| AirEitherTM Sector
Antenna SA Series
   The
AirEther line of
Sector Directional
Antennas offers 15, 18, and 21 dBi gain with a wide
beam-width. It is a professional quality
of "cell site" base station antenna, and it is designed primarily for
carrier-class applications and service providers using the 2.4 GHz
ISM band. The antenna is packaged with a directional orientation
bracket that makes the main beam width and angle to be adjustable, when
the antenna is installed on the top of a mountain, a radio tower,
or a
high raise building. This feature offers maximum signal strength for
both reception and transmission in a desired area. In addition, the
directional characteristic allows the user to adjust the transmitting
and receiving angle of the antenna, and it is designed specifically for
outdoor building to building application with different height of
buildings.
|
| 82-3261 |
15 dBi 120°
Sector AirEther™antenna |
Data Sheet
|
230.00 |
| 82-3262 |
12/18 dBi
120°/60° Sector AirEther™antenna |
Data Sheet
|
299.00 |
| 82-3263 |
18/21 dBi 120°/60°
Sector AirEther™antenna |
Data Sheet
|
337.00 |
|
2.4 GHz
Amplifiers, Outdoor
|
|
|
 |
•
Bi-directional for 802.11b
• Automatic Gain Control
• Wide input level: +7dBm to 20 dBm
• Includes DC Power Injector
• Built-in Lightning Suppression
• Outdoor All Weather Enclosure
|
|
|
82-3217
|
2.4 GHz Amplifier, 1W
output
|
Data Sheet
|
299.99
|
82-6443
|
2.4 GHz DC-Pass
Lightning Suppressor
|
|
99.00
|
The AirEther™ BR108 is a carrier class long range
outdoor wireless bridge and is an ideal outdoor wireless backhaul
solution. The AirEther BR108 is protected by an IP68 certified die-cast
all weather housing and lightning protector. The AirEther BR108 is
designed for a wide variety of outdoor applications and can be deployed
as point-to-point and point-to-multipoint solutions. The AirEther BR108
is an ideal backhaul solution due to their low cost, superior
performance, range, ease of installation and management. The AirEther
BR108 offers two data rates, based on the IEEE 802.11a mode and the
IEEE802.11a turbo mode. When the bridge operates under the IEEE 802.11a
mode, it supports data rates from 6 Mbps to 54 Mbps. Under the
IEEE802.11a turbo mode, it supports data rates from 12 Mbps to 108
Mbps. The frequency channel for the IEEE802.11a and the IEEE802.11a
turbo are across from 5.15 to 5.85 GHz. 
