Planet Networking & Communication

Phone 888-245-8363 for access to our reseller's section, product data sheets and pricing.

05/29/2013



802.11g Wireless Access Points / CPEs / USB Dongles	Power-over-Ethernet (PoE) Injector
10/100 Mbps (Auto-Sensing) Fast Ethernet Switch	Ethernet / Fast Ethernet Fiber Optic Converters
Gigabit Switches	VDSL Converters
Stack / Routing / VLAN Gigabit Switches	PCI LAN Adapter

Wireless Access Points/CPEs/USB Dongles
Part No.		Description
29-8238	WAP-4060PE	802.11g Wireless LAN Managed Access Point with PoE
		• Wireless LAN IEEE802.11b/g compliant • Supports PoE port (IEEE802.3af compliant) • Supports IEEE802.11d standard (Worldwide mode) • Strong network security with 802.1X authentication, and 64/128-bit WEP encryption • Supports WPA (Wi-Fi Protected Access) for both 802.1x and WPA-PSK • One detachable reverse-polarity SMA connectors can connect to external antenna for expanding connection distance • Super G mode efficiently raises the data transfer rate up to 108Mbps • Five operation modes selectable: AP / AP Client / Wireless Bridge / Multiple Bridge / Repeater • Adjustable output power level • Support Multiple SSIDs, Multiple SSID isolation, 802.1Q VLAN, RADIUS MAC authentication, Rogue AP detection, Access Control • Provide Windows-base utility, Web, and CLI (Command Line Interface) Configuration • SNMP support, Includes power cube

29-8274	WNL-U554A	802.11g USB Adapter with Rubber Duck antenna • Compliant with IEEE 802.11b, IEEE 802.11g, IEEE 802.11n • Mini-Size Design • USB 2.0 attached interface • Detachable RP-SMA connector with 3dBi dipole antenna • Provides up to 150Mbps download and 150Mbps upload data rate • Supports Wi-Fi Protected Setup (WPS) • Supports WEP 64/128, WPA, WPA-PSK, WPA2, WPA2-PSK, LEAP • Cisco CCX support • Supports QoS-WMM (WiFi Multi-Media) function / WMM-PS • Supports Software AP mode • Supports most operating systems including Windows 2000 , XP, Vista and Windows7

29-8237	WL-U356A	802.11g USB Adapter (5 ft. cable) with RP-SMA Connector and Rubber Duck antenna • High data transfer rate - up to 54Mbps • Supports WEP 64/128/256 Bits, WPA protection • Supports Infrastructure and Ad-Hoc mode • Software AP function support • Data rate automatic fallback increases reliability • 5 ft. cable allows repositioning unit for best performance

10/100 Mbps (Auto-Sensing) Fast Ethernet Switches
Part No.		Description
29-8154	FSD-503	5-Port 10/100Base-TX Switch (Desktop) • Flow Control support in half-duplex mode • 1K/2K MAC Address Table

29-8148	ISW-501T	5-Port 10/100Base-TX Industrial Switch for Wide Temperature Operation • 5-Port 10/100Mbps RJ-45 with auto MDI / MDI-X function • Requires power supply (+12 to 48VDC) • Temperature range: -40°C to +75°C • DIN rail mountable

29-8265	GSD-503	5 Port 10/100/1000 Gigabit Ethernet Switch • IEEE802.3x, full duplex flow control compliant; back-pressure, half duplex flow control • Per port auto-MDI-X detection • 8K MAC address table auto-ageing, 112K bytes packet buffer

29-8149	IGS-501	5-Port 10/100/1000Mbps Industrial Gigabit Ethernet Switch • 5-Port 10/100/1000Base-T RJ-45 with auto MDI/MDI-X function • Requires power supply (+12 to 48VDC) • Temperature range: -10°C to +60°C • DIN rail mountable

29-8283	IGS-801M	8-Port 10/100/1000Mbps Industrial Gigabit Managed Switch • 8-Port 10/100/1000Base-T RJ-45 with auto MDI/MDI-X function • Remote Web-based management • Access through SNMP v1, v2c • Requires power supply (+12 to 48VDC) • Temperature range: -10°C to +60°C • DIN rail mountable

29-8163	FSD-805	8-Port 10/100Base-TX Switch • Flow Control support in half-duplex mode • 1K/2K MAC Address Table

29-8271	WGSD-1022C	8-Port 10/100Mbps + 2-Port Gigabit TP/SFP Combo Managed Switch • IP Stacking up to 8 units • 802.1Q VLAN • Rapid Spanning Tree • SNMP / SNMP Trap • IGMP Snooping • SFP slots, Fiber link capability

29-8199	FNSW-1601	16-PORT 10/100Base-TX Switch • Auto-negotiation 10/20Mbps, 100/200Mbps • Filtering/Forwarding Rate: 148800pps for 100Mbps, 14880pps for 10Mbps • Switching Fabric: 4.2 Gbps

29-8212	FNSW-2401	24-PORT 10/100Base-TX Switch • Auto-negotiation 10/20Mbps, 100/200Mbps • Filtering/Forwarding Rate: 148800pps for 100Mbps, 14880pps for 10Mbps • Switching Fabric: 4.2 Gbps

29-8202	FNSW-4800	48-PORT 10/100Base-TX Switch • Auto-negotiation 10/20Mbps, 100/200Mbps • Filtering/Forwarding Rate: 148800pps for 100Mbps, 14880pps for 10Mbps • Switching Fabric: 4.2 Gbps

Gigabit Ethernet Switches
Part No.		Description
29-8265	GSD-503	5-Port 10/100/1000 Gigabit Ethernet Switch • IEEE802.3x, full duplex flow control compliant; back-pressure, half duplex flow control • Per port auto-MDI-X detection • 8K MAC address table auto-ageing, 112K bytes packet buffer

29-8149	IGS-501	5-Port 10/100/1000 Industrial Gigabit Ethernet Switch • 5-Port 10/100/1000Base-T RJ-45 with auto MDI/MDI-X function • Requires power supply (+12 to 48VDC) • Temperature range: -10°C to +60°C • DIN rail mountable

29-8283	IGS-801M	8-Port 10/100/1000Mbps Industrial Gigabit Managed Switch • 8-Port 10/100/1000Base-T RJ-45 with auto MDI/MDI-X function • Remote Web-based management • Access through SNMP v1, v2c • Requires power supply (+12 to 48VDC) • Temperature range: -10°C to +60°C • DIN rail mountable

29-8246	GSW-1601	16-PORT 10/100/1000 Gigabit Ethernet Switch • Comply with IEEE 802.3, 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T Ethernet standard • 16 10/100/1000Mbps Gigabit Ethernet ports • Features Store-and-Forward mode with wire-speed filtering and forwarding rates • Hardware based 10/100Mbps, half / full duplex and 1000Mbps full duplex mode, flow control and auto-negotiation • IEEE 802.3x flow control for full duplex operation and Backpressure for half duplex operation • Integrated address look-up engine, supports 8K absolute MAC addresses • 9K Jumbo packet support • Automatic address learning and address aging • Supports Auto MDI/MDI-X function • Supports CSMA/CD protocol

29-8250	GSW-2401	24-PORT 10/100/1000 Gigabit Ethernet Switch • Comply with IEEE 802.3, 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T Ethernet standard • 24 10/100/1000Mbps Gigabit Ethernet ports • Features Store-and-Forward mode with wire-speed filtering and forwarding rates • Hardware based 10/100Mbps, half / full duplex and 1000Mbps full duplex mode, flow control and auto-negotiation • IEEE 802.3x flow control for full duplex operation and Backpressure for half duplex operation • Integrated address look-up engine, support 8K absolute MAC addresses • 9K Jumbo packet support • Automatic address learning and address aging • Supports Auto MDI/MDI-X function • Supports CSMA / CD protocol

Stackable / VLAN 10/100/Base-Tx & Gigabit Switches
Part No.		Description
29-8256	WGSW-2840	24-Port 10/100Mbps + 4G TP/SFP Combo Managed Stackable Switch • 24-Port 10/100Mbps TP interfaces • 4-Port Gigabit TP/SFP combo interface • Complies with IEEE802.3, 10Base-T, IEEE802.3u, 100Base-Tx, IEEE 802.3ab 　1000Base-T, IEEE 802.3z 1000Base-LX/SX Ethernet standards • High back-plane bandwidth 12.8Gbps • Console/Web/SNMP management • Configuration backup and recovery • Per port Ingress/Egress bandwidth restriction • 802.1d Spanning tree, 802.1w Rapid Spanning Tree • Configurable spanning tree aging time, STP port configuration • 12 trunk groups, up to 8 ports per trunk • Port-based/802.1Q VLAN with 4K VLAN ID • MAC Binding/Filtering/Learning, configurable MAC Aging time

		• 8 mappings ID to 4 priority queues, Support MAC/VLAN/802.1p/Port to CoS mapping • IGMP snooping and IGMP Query mode for Multi-media application • Statistic Routing Port • 1 to many Ingress/Egress Port mirror and Port analysis • Broadcast/Multicast/Flooded storm control • IP Stacking management, up to 8 units


29-8271	WGSD-1022C	8-Port 10/100Mbps + 2-Port Gigabit TP/SFP Combo Managed Stackable Switch • IP Stacking up to 8 units • 802.1Q VLAN • Rapid Spanning Tree • SNMP / SNMP Trap • IGMP Snooping • SFP slots, Fiber link capability

Fast Ethernet & Gigabit to Fiber Optic Converters
Part No.		Description
29-8269	MC-1500	15-Slot Media Converter Chassis • High quality 19" Rack-Mountable Chassis installation • Supports up to fifteen (15) modular media converters • Two fans brings the air-flow for system cooling, and LED indicators for system and fan status • Bay power isolation, ensure each bay is electrically isolated from each other • Support multiple converters - 10/100/1000Mbps, copper, Fiber, single/multi-mode ST/SC/MTRJ connectors • Reduce the effort of converter maintenance and management, diagnose the status at one time • Cost-effective, easy to install

Multimode Fiber Converters
29-8118	FT-801	10/100Base-TX to 100Base-FX (ST) Fast Ethernet Converter • Supports up to 1350 ft. multimode fiber • Operates stand-alone or in MC-1500 Chassis (29-8269)
29-8119	FT-802	10/100Base-TX to 100Base-FX (SC) Fast Ethernet Converter • Supports up to 1350 ft. multimode fiber • Operates stand-alone or in MC-1500 Chassis (29-8269)

29-8242	GT-802	10/100/1000Base-T to 100Base-SX (SC) Multimode Gigabit Converter • Supports up to 721 ft. with 62.5/125 multimode fiber • Supports up to 1640 ft. with 50/125 multimode fiber • Operates stand-alone or in MC-1500 Chassis (29-8269)

29-8272	GT-705	1000BaseT to 1000Base-SX (LC) Multimode Gigabit Converter • Supports up to 721 ft. with 62.5/125 multimode fiber • Supports up to 1640 ft. with 50/125 multimode fiber
29-8249	GT-705A	Gigabit Ethernet Media Converter • One-channel media conversion between 1000Base-T and 1000Base-SX/LX • Provides one SFP (mini-GBIC) slot supporting either multi-mode or single mode fiber, flexibility in Gigabit Ethernet fiber-optic wiring with different SFPs installed • Auto MDI/MDI-X for TP port • Operates stand-alone or in MC-1500 Chassis (29-8269)
Singlemode Fiber Converters
29-8240	FST-802S15	10/100Base-TX to 100Base-FX (SC) Singlemode Fiber Converter 15 Km • Supports up to 9.31 miles (15 km). with 9/125 singlemode fiber • Operates stand-alone or in MC-1500 Chassis (29-8269)

29-8241	FT-802S50	10/100Base-TX to 100Base-FX (SC) Singlemode Fiber Converter 50 Km • Supports up to 31 miles (50 km). with 9/125 singlemode fiber • Operates stand-alone or in MC-1500 Chassis (29-8269)


29-8249	GT-705A	Gigabit Ethernet Media Converter • One-channel media conversion between 1000Base-T and 1000Base-SX/LX • Easy installation • Provides one SFP (mini-GBIC) slot supporting either multi-mode or single mode fiber, flexibility in Gigabit Ethernet fiber-optic wiring with different SFPs installed • Auto MDI/MDI-X for TP port • Operates stand-alone or in MC-1500 Chassis (29-8269)

Power over Ethernet (PoE) (802.3af) Injector Hubs/Switches
Part No.	Model No.	Description
29-8273	POE-400	4-Port 802.3af PoE Injector Hub
		• Complies with IEEE 802.3af • 4-Port IEEE 802.3af in-line mid-span power injector box • Palm size for Desktop • Includes 120VAC powercube • Requires 10/100 external switch

29-8253	POE-1200	12-Port 802.3af PoE Injector Hub with Web Management
		• 24-Port RJ-45 STP • 10/100Base-TX management port • Requires 10/100 external switch

29-8254	POE-2400	24-Port 802.3af PoE Injector Hub with Web Management
		• 48-Port RJ-45 STP • 10/100Base-TX management port • Requires 10/100 external switch

29-8132	FSD-804PS	8-Port 10/100Base-TX Switch with 4-Port PoE Injector and Web Management
		• 8-Port 10/100Mbps Fast Ethernet ports • 4-Ports support 48VDC power to PoE powered device (802.3af) • SNMP with remote web management • QOS support and bandwidth control • 802.1Q VLAN support

29-8268	GSD-802PS	8-Port PoE Injector 10/100/1000 Gigabit Switch with 2 Shared SFP Ports
		• 8-Port 10/100/1000Mbps Gigabit Ethernet with PoE injector • 2 mini-GBIC / SFP slots, shared with Port-7 and Port-8 • Supports 802.1Q tagged and port based VLANs • Supports 802.1w rapid spanning tree protocol

29-8134	POE-E101	1-Port 802.3af PoE Extender/Repeater
		• Extends the range of PoE an additional 100 meters (328ft.) • Extends the 10/100Base-TX signal to 400 meters (with 3 units) • PoE power depends on extension range 1 Extender: 200 meters @ 13 watts 2 Extenders: 300 meters @ 11 watts 3 Extenders: 400 meters @ 9 watts • Forwards both Ethernet data and PoE power to remote devices • Automatically detects and protects PoE equipments from being damaged by incorrect installation • No external power cable required for installation, powered by PoE • Compact size, Wall-Mountable design

Ethernet over VDSL-2 Converters
Part No.		Description
29-8281	VC-201A	100Mbps Ethernet over VDSL2 Converter
		• Send ethernet data over existing copper telephone lines without rewiring • Voice and data communication can be shared simultaneously • Cost-effective VDSL2 CO / CPE bridge solution, CO / CPE selectable via DIP Switch • Two RJ-11 connectors for each VDSL port, one for VDSL connection and one for POTS connection • Supports extensive LED indicators for network diagnostics • Supports Profile 17a • Operates at EXTENDED DISTANCE in asymmetric mode 100/55 Mbps asymmetric data rate to 656 ft. (200m) 25/4 Mbps asymmetric data rate to 5,248 ft. (1.6km) • Operates at EXTENDED DISTANCE in symmetric mode 90/90 Mbps symmetric data rate to 656 ft. (200m) 20/15 Mbps symmetric data rate to 5,248 ft. (1.6km) • Easily set up point-to-point connection with one pair of converters

29-8282	VC-234	100Mbps Ethernet (4-port LAN) over VDSL2 Converter
		• Includes 4-port 10/100 base-TX hub • Send ethernet data over existing copper telephone lines without rewiring • Voice and data communication can be shared simultaneously • Cost-effective VDSL2 CO / CPE bridge solution, CO / CPE selectable via DIP Switch • Two RJ-11 connectors for each VDSL port, one for VDSL connection and one for POTS connection • Supports extensive LED indicators for network diagnostics • Supports Profile 17a & 30a • Operates at 100/100 mbps symmetric data rate to 984 ft. (300m) • Operates at 20/4 mbps asymmetric data rate to 4592 ft. (1.4km) • Easily set up point-to-point connection with one pair of converters

PCI LAN Adapter
Part No.		Description
29-8172	ENW-9503	10/100Base-TX PCI Adapter, Full Duplex • Complies to IEEE 802.3 CSMA/CD, 100Base-TX, and 10Base-T Standard • Complies to PCI local bus specification. (Revision 2.2)