Antenna Mounting Accessories

Connectronics

Antenna Mounting Accessories

Antenna Mast Sections

	• 1.25" O.D., 5 ft. sections • Corrosion Protected • Plastic Cap • Optional Swagged end
	• 1.9" O.D. or 2.375" O.D., 8 ft. long • Heavy Duty Aluminum

Part No.	Description
82-6380	5 ft. x 1.25" O.D. Mast section
82-6380SW	5 ft. x 1.25" O.D. Mast section, swagged
82-6379-8	8 ft. x 1.9" O.D. Aluminum Mast
82-6378-8	8 ft. x 2.375" O.D. Aluminum Mast

Universal Antenna Mount

•     Full 90° tilt adjustment
•     Grey Powder coat finish
•     Supports 150 Lb. in both axis
•     1.5" Steel Tube
•     Two sizes - regular for 15 & 19dB antennas, (L) large for 21& 24dB antennas

Part No.	Description
82-6397	8" X 16" w/ 7.5" mounting bracket
82-6397L	12" X 22" w/ 9" mounting bracket

Adjustable Pipe to Pipe Adapters

• Pair of clamps included
• 3.5" and 5" O.D. Max sizes available

Part No.	Description
82-6215	Pipe-to-Pipe Clamp (1.5" to 3.5" O.D.)
82-6216	Pipe-to-Pipe Clamp (2.375" to 5" O.D.)

Deluxe Guy Wire Clamp

•     3 Eye Bolts
•     Corrosion Protected
•     Fits masts up to 2.5" O.D.

Part No.	Description
82-6381	Deluxe Guy Wire Clamp

Chimney Mast Mount

•     Includes two 18 ft. Stainless Steel Straps
•     Includes two mast securing brackets
•     Will work with 1.25"-1.5" masts

Part No.	Description
82-6376-18	Chimney Mast Mount

2, 3, & 5 ft. Heavy Duty Tripods

•     Self-supporting roof mount
•     Corrosion Protected
•     Heavy Duty

Part No.	Description
82-6382	Self-supporting 2 ft. Tripod
82-6384	Self-supporting 3 ft. Tripod
82-6383	5 ft. Tripod for masts up to 1.75" O.D
82-6383L	5 ft. Tripod for masts 1.75" to 2.25" O.D.
82-6379-8	8 ft. x 1.9" O.D. Aluminum Mast
82-6389	Pitch Pad Sealing Kit for 2 & 3ft Tripods
82-6386	Pitch Pad Sealing Kit for 5 ft Tripods

Wall Mount Bracket

•     8" Standoff from wall
•     Mounting Tube: 1.25" O.D. X 2.75' Tall
•     For mounting pole type antennas to wall

Part No.	Description
82-6399	Wall Mount Bracket

Eave Mount Bracket

•     Heavy Duty Adjustable
•     Zinc with Clear Coat
•     Requires 1.25" O.D. mast (82-6380)

Part No.	Description
82-6377	Eave Mount Bracket

Y-Type Wall Mounts

•    Three sizes: 6", 12", 24"
•    2 Bracket Set
•    Corrosion Protected
•    With extra leg support
•    For masts up to 1-1/2" O.D.

Part No.	Description
82-6388	6" Y-Type Wall Mount
82-6385	12" Y-Type Wall Mount
82-6387	24" Y-Type Wall Mount

Non-Penetrating Roof Mounts

Light Weight for up to 24 dBi Grid Antenna

•    1.25" or 2.375" O.D. Mast Mounting
•    Rests on flat roof without penetration
•    Protective Pad Kit available
•    50 ft. Safety Cable Kit available
•    Frame holds 8 cement blocks in single layer
•    Ship by UPS
•    35" x 35" frame size

Part No.	Description
82-5469	LW Mount with 5 ft. mast, 1.25" O.D.
82-5470	LW Mount with 5 ft. mast, 2.375" O.D.
82-5471	Protective Pad Kit (0.125" thick)
82-5472-50	50 ft. Safety Cable Kit

Non-Penetrating Roof Mounts

Medium Weight for up to 3 ft. Dish w/ Radome @ 9 ft. Height.

•    2.375" O.D. Mast Mounting
•    Rests on flat roof without penetration
•    Requires 6 Protective Pads (17-4345)
•    50 ft. Safety Cable Kit available
•    5 ft. OR 10 ft. Mast (2.375" O.D.)
•    Base Frame holds 12 cement blocks in single layer
•    60" x 60" frame size

Part No.	Description
82-5473	MW Mount with 5 ft. mast, 2.375" O.D.
82-5474	MW Mount with 10 ft. mast, 2.375" O.D.
17-4345	Protective Pad (2ft. x 3ft.)
82-5472-50	50 ft. Safety Cable Kit

Non-Penetrating Roof Mounts

Heavy Weight for up to 4 ft. Dish w/ Radome @ 7 ft. Height.

•    4.5" O.D. Mast Mounting
•    Rests on flat roof without penetration
•    Requires 8 Protective Pads (17-4345)
•    50 ft. Safety Cable Kit available
•    90" single Mast
•    7 ft. x 8.4 ft. Frame holds 36 cement blocks in single layer

Part No.	Description
82-5483	MHW Mount with 7'6". mast, 4.5" O.D.
17-4345	Protective Pad Kit (2' x 3')
82-5472-50	50 ft. Safety Cable Kit

Standoff Arms for Omni's & Panel Antennas

•   Light weight design
•    Used to separate antennas
•   24" antenna mtg. pipe on 1 ft. standoff
•   27" antenna mtg. pipe on 1-1/2 ft. standoff
•   27" antenna mtg. pipe on 2 ft. standoff
•    Secured to mast or tower by 4 hose clamps

Part No.	Description
82-5489	1 ft. Standoff Arm, 24" Antenna. Mount
82-5486	1-1/2 ft. Standoff Arm, 27" Antenna. Mount
82-5487	2 ft. Standoff Arm, 27" Antenna. Mount

Weatherproofing Fusion Tape & Cold Shrink Tubing

weatherproof fusion tape, cold shrink tubing

Fusion Tape - Use on antenna connectors
•    Self-sealing
•    Seamless Silicone Rubber
•    Conforms to irregular shapes
•    Protective Sealant against moisture
•    1" x 20 ft./Roll, or 5 ft. Roll available

Cold Shrink Insulator - 3 Sizes
•    Permanent , durable, moisture-tight
•    Conforms to irregular shapes
•    Prestretched on a removable core for efficiency
     and ease of installation

Part No.	Description
16-8506	20 ft. roll Fusion Tape
16-8506-5	5 ft. roll Fusion Tape
16-8540	Cold Shrink Tubing, 9" (0.55"-1.18")
16-8541	Cold Shrink Tubing, 7" (0.48"-0.95")
16-8542	Cold Shrink Tubing, 9" (0.40"-1.18")

2-Way and 3-Way Antenna Splitters

• N-Female connectors
• Power Divider
• Outdoor Unit shown
• Indoor model also available

Part No.	Description
82-3622	900MHz 2-Way Splitter, Outdoor
82-5879A	2.4 GHz 2-Way Antenna Splitter, Outdoor
82-5879E	2.4 GHz 2-Way Antenna Splitter, Indoor
82-5849	2.4 GHz 3-Way Splitter, Outdoor
82-3621	4.9-6 GHz 2-Way Antenna Splitter, Indoor
82-3623	4.9-6 GHz 3-Way Splitter, Outdoor
82-3620	5.3-5.9GHz 2-Way Splitter, Outdoor