RFS BULK CABLE   CELLFLEX® Low-L
RFS BULK CABLE & CONNECTORS
    Retail Dealer
CELLFLEX® Low-Loss Foam-Dielectric Coaxial Cable (by the foot)
82-7073 1/2”   1.56 1.17
82-7074 7/8”   3.02 2.26
 
RFS CABLE CONNECTORS  
82-3064-12 N-Female for LCF12 Cable   23.33 17.50
82-3064-78 N-Female for LCF78 Cable   36.16 27.12
82-3062-12 N-Male for LCF12 Cable   23.33 17.50
82-3062-78 N-Male for LCF78 Cable   33.42 25.06
82-3063-12 N-Male Right Angle for LCF12 Cable   43.85 32.89

FLEXWELL® Standard Elliptical Waveguide (by the foot)  
82-3085-60 Cable EP 60 J - 4.5-6.425 GHz 16.29 12.22
82-3085-105 Cable E105 E/EP 105 J - 10.5-11.7GHz 12.82 9.61
   
RFS WAVEGUIDE CONNECTORS - for FLEXWELL® elliptical waveguide, tunable
82-3093-60 E60, CPR137G Flange  335.65 251.74
82-3093-105 E105, CPR90G Flange  290.91 218.18

82-3075-3 Twistflex-3ft 11GHz/CPR90G 382.20 286.65
82-3076-3 Twistflex-3ft 6GHz /CPR137G 382.20 286.65
  Many more options available

Automated Trimming Tool
82-3084-12 for 1/2” Cable   511.64 383.73
82-3084-78 for 7/8” Cable 549.82 412.36
 
Manual Trimming Tool
82-3086-12 for 1/2” Cable (requires JStrip) 127.91 95.93
82-3086-78 for 7/8” Cable (requires JStrip) 129.82 97.36
 
Standard Jacket Stripping Tool
82-3089-12 for LCF12 301.64 226.23
82-3089-78 for LCF78 305.45 229.09
 
TIMES MICROWAVE BULK CABLE
UV Resistant Polyethylene jacketed cable (by the foot)    
82-4728 LMR-400   1.20 .95
82-4729 LMR-600   2.00 1.60
82-4601 LMR-900   5.39 4.49
         
CONNECTORS FOR TIMES MICROWAVE CABLE
82-4773 N-Male Plug for LMR-400   11.00 6.50
82-4773-EZ N-Male for Plug for LMR-400 Crimp 12.00 8.86
82-4778 N-Female Plug for LMR-400 13.00 9.00
82-4778-EZ N-Female for Plug for LMR-400 Crimp   18.75 15.00
         
82-4517 N-Male Plug for LMR-600 Crimp 33.95 27.70
82-4779 N-Female Plug for LMR-600 39.95 32.50
82-4779-EZ N-Female for Plug for LMR-600 Crimp   39.95 32.50
         
82-4612 N-Male for LMR-900   70.20 58.50
         
Crimping Tool
68-1051 for LMR-400 138.00 114.00
68-1052 for LMR-600 138.00 110.00
 
Stripping Tool
68-1053 for LMR-400   99.00 79.95
68-1054 for LMR-600 99.00 87.50
 
Lace-Up Hoisting Grip for terminated or unterminated:
82-3092-12L 1/2” Cable, LCF12/E220, LMR600   18.29 13.72
82-2960 LMR-900 and 5/8” Cable 20.40 15.30
82-3092-78L 7/8” Cable, LCF78/EP105 19.80 14.85
82-3092-114L 1-1/4” Cable and Elliptical Waveguide 23.16 17.37
82-3092-158L 1-5/8” Cable 31.98 23.99
   
Pre-Laced Hoisting Grip for unterminated:
82-2950 LMR-400 Cable 16.80 12.60
82-2951 LMR-600 and 1/2” Cable 18.30 13.70
82-4933 LMR-900 and 5/8” Cable 24.20 18.10
82-3092-78C 7/8” Cable, Waveguide 24.98 18.74
         
Universal Snap-In Hangers 10-pack      
83-0001-12 for 1/2” cable and LMR-600   24.98 18.74
83-0001-58 for 5/8” cable      
83-0001-78 for 7/8” cable      
83-0001-52 for EW52 Waveguide   112.25 84.19
83-0001-63 for EW63 Waveguide   106.91 80.18
83-0001-90 for EW90 Waveguide   90.20 67.65
         
Standard/Butterfly Hanger Kit 10-pack      
82-2830 for LMR-400 cable   21.50 16.10
83-0010-060 for E/EP61, EW52   30.20 22.65
83-0010-105 for 7/8”, E/EP105, LCF, HCA78   21.20 15.90
83-0010-114 for 1¼” cable, E65/E70/EW63   27.09 20.31
83-0010-12 for ½” cable and LMR-600   20.84 15.63
83-0010-58 for 5/8” cable      
         
Clip-On Hanger Kits      
83-0017 for 1/2” cable, LMR-600   16.60 12.40
83-0018 for 7/8” cable, LMR-600   17.60 13.20
         
Stackable Snap-In Hanger Kits 10-pack      
83-0002-12 for 1/2” cable and LMR-600      
83-0002-78 for 7/8” cable      
83-0002-114 for 1-1/4” cable      
83-0002-158 for 1-5/8” cable      
83-0019 Angle Member Adapter Stainless steel 3/8” thread includes screw, - 10-pack      
       
82-3067 Universal Angle Member Adapter Stainless - 3/4" holes with insert 3/8” thread - Kit of 10      
   
82-2270 Spare Hardware Kit for Hangers, Stainless Steel, 10-pack, 3/8” dia. x 3/4” long bolt, nuts and lockwashers   8.45 6.74
   
82-2873 Mini Cluster Snap-in Adapter Block, 10-pack with 3x 3/4” holes and 3x 3/8” holes for snap-in or standard hangers
(mounts with 82-2870 or 82-2876-x).Hardware not included
     
       
82-2874-0 Three-way Snap-in Stand-off Adapter Only, 10-pack (order round member adapter 82-2881-x separately)      
         
       
Round Tower Standoff Adapter, 10-pack for 2” to 3” diameter, with 3/8” tapped hole for standard or clip-on hangers    
82-2876-3 with round member adapter clamp      
82-2876-0 without round member adapter clamp-  order separately (82-2881-x)      
82-2878-3  for 2”to 3” diameter, with 3/4” Hole for snap-in hangers      
82-2878-0 Round Tower Snap-in Standoff Adapter with 3/4” Hole for snap-in hangers, 10-pack,
(order round member adapter 82-2881-x separately below)
     
       
Round Tower Universal Standoff Adapter, 10-pack with insert to convert 3/4” snap-in hole to 3/8” tapped hole f
or use with standard & clip-on hangers with adapter clamp
82-2880-2 for 1” to 2” diameter pole      
82-2880-3 for 2” to 3” diameter pole      
82-2880-4 for 3” to 4” diameter pole      
82-2880-5 for 4” to 5” diameter pole      
82-2880-0 Round Tower Universal Standoff Adapter, 10-pack (order round member adapter 82-2881-x separately below)    
       
Round Member Adapter Clamp, 10-pack      
83-0027-1 for 1”to 2” diameter pole      
83-0027-2 for 2”to 3” diameter pole      
83-0027-3 for 3”to 4” diameter pole      
83-0027-4 for 4”to 5” diameter pole      
83-0027-5 for 5”to 6” diameter pole      
         
75-0021 Stainless Steel Banding Kit  - Includes 100 ft. 1/2” band, 100 buckles and tool      
         
Wall Mount Coax Brackets for standard or snap-in hangers      
82-2864-4 with 7x 3/8” and 3/4” hole pairs (11” length)
     
82-2864-8 with 14x 3/8” and 3/4” hole pairs (23” length)      
82-2865 Star Support T-Bracket with 12x 3/8” and 12x 3/4” holes for 1½” to 5-9/16”OD round members or 2½” to 5” angle members      
   
82-2867-8 Universal Strut for Snap-In Hangers, 8ft Section, 3/4” holes on 3” centers
(cut to length) (UPSable)
     
         



Cable Management Port Products